Description

光伏背板用尼龙PA12抗紫外线等级

尼龙PA12抗紫外线等级
尼龙PA12玻璃纤维30%
尼龙PA12碳纤维25%
聚酰胺PA12阻燃剂V0
聚酰胺PA12增韧等级
聚酰胺PA12高抗冲击等级

光伏背板用尼龙PA12防紫外线

产品详细信息用于光伏背板的尼龙PA12抗紫外线尼龙12是一种良好的电绝缘体，与其他聚酰胺一样，不会因潮湿而影响绝缘性能。它具有良好的抗冲击性和化学稳定性。尼龙12在增塑性能和增强性能方面有许多改进品种。与PA6和PA66相比，这些材料的熔点和密度更低，回潮率非常高。尼龙12不耐强氧化性酸。尼龙12的粘度主要取决于湿度、温度和储存时间。它是非常流动的。收缩率在0.5%到2%之间，这取决于材料种类、壁厚和其他工艺条件。尼龙PA12防紫外线

尼龙PA12防紫外线

尼龙PA12聚酰胺12或尼龙12的典型应用：水位计和其他商业设备、电缆护套、机械凸轮、滑动机构、光伏背板和轴承，尼龙PA12防紫外线等光伏背板用尼龙PA12防紫外线<干燥处理：加工前水分含量应低于0.1%。如果材料储存在空气中，建议在80℃下除湿干燥4~8小时。如果材料储存在封闭容器中，则可在温度平衡3小时后直接使用。尼龙PA12抗紫外线熔融温度：240~300°C；对于普通特性材料，温度不得超过310℃，对于具有阻燃性能的材料，温度不得超过270℃

高速注射速度允许良好成型。关于防紫外线尼龙，请直接联系我们

立即联系：特蕾西

Nylon PA12 Anti-UV For Photovoltaic Backsheet

nylon PA12 Anti-UV grade
Nylon PA12 glass fiber 30%
Nylon PA12 carbon fiber 25%
Polyamide PA12 flame retardant V0
polyamide PA12 toughen grade
Polyamide PA12 high impact grade

Nylon PA12 Anti-UV For Photovoltaic Backsheet

Product Details

Nylon PA12 Anti-UV for photovoltaic backsheet

Nylon 12 is a good electrical insulator and, like other polyamides, does not affect insulation properties due to moisture. It has good impact resistance and chemical stability. Nylon12 has many improved varieties in terms of plasticizing properties and reinforcing properties. Compared to PA6 and PA66, these materials have a lower melting point and density and have a very high moisture regain. Nylon12 is not resistant to strong oxidizing acids. The viscosity of nylon12 depends mainly on humidity, temperature and storage time. It is very fluid. The shrinkage is between 0.5% and 2%, depending on the material variety, wall thickness and other process conditions.Nylon PA12 Anti-UV

Nylon PA12 Anti-UV

Typical applications for PA12 polyamide 12 or nylon 12: water gauges and other commercial equipment, cable jackets, mechanical cams, sliding mechanisms, photovoltaic backsheets and bearings, etc.Nylon PA12 Anti-UV

Nylon PA12 Anti-UV for photovoltaic backsheet

1. Drying treatment: The water content should be below 0.1% before processing. If the material is stored in the air, it is recommended to dehumidify and dry at 80C for 4~8 hours. If the material is stored in a closed container, it can be used directly after 3 hours of temperature equilibration.Nylon PA12 Anti-UV
   

2. Melting temperature: 240~300 °C; do not exceed 310 °C for ordinary characteristic materials, and do not exceed 270 °C for materials with flame retardant properties.
   

3. High speed injection speeds allow for good molding.Nylon PA12 Anti-UV

Any questions about nylon PA12 Anti-UV for photovoltaic backsheet,please contact us directly.

Contact Now：Tracy <###>

Nylon PA12 Anti-UV For Photovoltaic Backsheet

Rankmath
Kinggor



Visit Kinggor to get the best products. You will get the best quality products always from Kinggor.
Visit Kinggor to get the best products. You will get the best quality products always from Kinggor.
Visit Kinggor to get the best products. You will get the best quality products always from Kinggor.
Visit Kinggor to get the best products. You will get the best quality products always from Kinggor.
Visit Kinggor to get the best products. You will get the best quality products always from Kinggor.